Contract

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Callback for IAlgebraPoolActions#swap
/// @notice Any contract that calls IAlgebraPoolActions#swap must implement this interface
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraSwapCallback {
  /// @notice Called to `msg.sender` after executing a swap via IAlgebraPool#swap.
  /// @dev In the implementation you must pay the pool tokens owed for the swap.
  /// The caller of this method _must_ be checked to be a AlgebraPool deployed by the canonical AlgebraFactory.
  /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
  /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
  /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
  /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
  /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
  /// @param data Any data passed through by the caller via the IAlgebraPoolActions#swap call
  function algebraSwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
pragma abicoder v2;

import '@cryptoalgebra/integral-core/contracts/interfaces/callback/IAlgebraSwapCallback.sol';

/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Algebra
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-periphery
interface ISwapRouter is IAlgebraSwapCallback {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        address deployer;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 limitSqrtPrice;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);

    struct ExactInputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountIn;
        uint256 amountOutMinimum;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInput(ExactInputParams calldata params) external payable returns (uint256 amountOut);

    struct ExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        address deployer;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
        uint160 limitSqrtPrice;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another token
    /// @dev If native token is used as input, this function should be accompanied by a `refundNativeToken` in multicall to avoid potential loss of native tokens
    /// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);

    struct ExactOutputParams {
        bytes path;
        address recipient;
        uint256 deadline;
        uint256 amountOut;
        uint256 amountInMaximum;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
    /// @dev If native token is used as input, this function should be accompanied by a `refundNativeToken` in multicall to avoid potential loss of native tokens
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutput(ExactOutputParams calldata params) external payable returns (uint256 amountIn);

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @dev Unlike standard swaps, handles transferring from user before the actual swap.
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingleSupportingFeeOnTransferTokens(
        ExactInputSingleParams calldata params
    ) external payable returns (uint256 amountOut);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

library DataTypes {
  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    //the current stable borrow rate. Expressed in ray
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    //stableDebtToken address
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115 borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151 supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167 liquidation protocol fee
    //bit 168-175 eMode category
    //bit 176-211 unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251 debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252-255 unused

    uint256 data;
  }

  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }

  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // each eMode category may or may not have a custom oracle to override the individual assets price oracles
    address priceSource;
    string label;
  }

  enum InterestRateMode {NONE, STABLE, VARIABLE}

  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currPrincipalStableDebt;
    uint256 currAvgStableBorrowRate;
    uint256 currTotalStableDebt;
    uint256 nextAvgStableBorrowRate;
    uint256 nextTotalStableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address stableDebtTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
    uint40 stableDebtLastUpdateTimestamp;
  }

  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }

  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }

  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }

  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }

  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 maxStableRateBorrowSizePercent;
    uint256 reservesCount;
    address addressesProvider;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }

  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }

  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }

  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 maxStableLoanPercent;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }

  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }

  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalStableDebt;
    uint256 totalVariableDebt;
    uint256 averageStableBorrowRate;
    uint256 reserveFactor;
    address reserve;
    address aToken;
  }

  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address stableDebtAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IFlashLoanSimpleReceiver} from '../interfaces/IFlashLoanSimpleReceiver.sol';
import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';

/**
 * @title FlashLoanSimpleReceiverBase
 * @author Aave
 * @notice Base contract to develop a flashloan-receiver contract.
 */
abstract contract FlashLoanSimpleReceiverBase is IFlashLoanSimpleReceiver {
  IPoolAddressesProvider public immutable override ADDRESSES_PROVIDER;
  IPool public immutable POOL;

  constructor(IPoolAddressesProvider provider) {
    ADDRESSES_PROVIDER = provider;
    POOL = IPool(provider.getPool());
  }
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.8.20;

import {IPoolAddressesProvider} from '../../../interfaces/IPoolAddressesProvider.sol';
import {IPool} from '../../../interfaces/IPool.sol';

/**
 * @title IFlashLoanSimpleReceiver interface
 * @notice Interface for the Aave flash loan receiver.
 * @author Aave
 * @dev implement this interface to develop a flashloan-compatible flashLoanReceiver contract
 **/
interface IFlashLoanSimpleReceiver {
  function executeOperation(
    address asset,
    uint256 amount,
    uint256 premium,
    address initiator,
    bytes calldata params
  ) external returns (bool);

  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  function POOL() external view returns (IPool);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.8.20;

import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";

interface IERC20WithPermit is IERC20Permit, IERC20Metadata {

}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../helpers/data/DataTypes.sol';

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);

  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );

  /**
   * @dev Emitted on swapBorrowRateMode()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user swapping his rate mode
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  event SwapBorrowRateMode(
    address indexed reserve,
    address indexed user,
    DataTypes.InterestRateMode interestRateMode
  );

  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on rebalanceStableBorrowRate()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user for which the rebalance has been executed
   */
  event RebalanceStableBorrowRate(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);

  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;

  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
   * corresponding debt token (StableDebtToken or VariableDebtToken)
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);

  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);

  /**
   * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
   * @param asset The address of the underlying asset borrowed
   * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
   */
  function swapBorrowRateMode(address asset, uint256 interestRateMode) external;

  /**
   * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
   * - Users can be rebalanced if the following conditions are satisfied:
   *     1. Usage ratio is above 95%
   *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
   *        much has been borrowed at a stable rate and suppliers are not earning enough
   * @param asset The address of the underlying asset borrowed
   * @param user The address of the user to be rebalanced
   */
  function rebalanceStableBorrowRate(address asset, address user) external;

  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address stableDebtAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;

  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);

  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;

  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);

  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);

  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;

  /**
   * @notice Configures a new category for the eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(uint8 id, DataTypes.EModeCategory memory config) external;

  /**
   * @notice Returns the data of an eMode category
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(uint8 id) external view returns (DataTypes.EModeCategory memory);

  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;

  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);

  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;

  /**
   * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
   * @return The percentage of available liquidity to borrow, expressed in bps
   */
  function MAX_STABLE_RATE_BORROW_SIZE_PERCENT() external view returns (uint256);

  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);

  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;
}

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );

  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );

  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);

  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;

  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);

  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;

  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;

  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);

  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;

  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);

  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;

  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);

  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;

  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);

  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;

  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);

  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;

  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);

  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;

  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);

  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.8.20;

/**
 * @title IPriceOracleGetter interface
 * @notice Interface for the Aave price oracle.
 **/

interface IPriceOracleGetter {
  /**
   * @dev returns the asset price in ETH
   * @param asset the address of the asset
   * @return the ETH price of the asset
   **/
  function getAssetPrice(address asset) external view returns (uint256);
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.8.20;
// pragma experimental ABIEncoderV2;

// @OpenZeppelin imports
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {IERC20WithPermit} from "../interfaces/IERC20WithPermit.sol";
import {FlashLoanSimpleReceiverBase} from "../helpers/flashloan/base/FlashLoanSimpleReceiverBase.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

// @QuickSwap imports
import {ISwapRouter} from "@cryptoalgebra/integral-periphery/contracts/interfaces/ISwapRouter.sol";

// Other imports
import {IPoolAddressesProvider} from "../interfaces/IPoolAddressesProvider.sol";
import {IPriceOracleGetter} from "../interfaces/IPriceOracleGetter.sol";
import {DataTypes} from "../helpers/data/DataTypes.sol";

/**
 * @title BaseQuickSwapAdapter
 * @notice Implements the logic for performing assets swaps on QuickSwap.
 * @author Aave
 */
abstract contract BaseQuickSwapAdapter is FlashLoanSimpleReceiverBase, Ownable {
    struct PermitSignature {
        uint256 amount;
        uint256 deadline;
        uint8 v;
        bytes32 r;
        bytes32 s;
    }

    using SafeERC20 for IERC20Metadata;
    using SafeERC20 for IERC20WithPermit;

    // Max slippage percent allowed
    uint256 public constant MAX_SLIPPAGE_PERCENT = 3000; // 30%

    IPriceOracleGetter public immutable ORACLE;
    ISwapRouter public immutable QUICKSWAP_ROUTER;

    event Swapped(address indexed fromAsset, address indexed toAsset, uint256 fromAmount, uint256 receivedAmount);

    event Bought(address indexed fromAsset, address indexed toAsset, uint256 amountSold, uint256 receivedAmount);

    constructor(IPoolAddressesProvider addressesProvider, ISwapRouter quickswapRouter, address owner)
        FlashLoanSimpleReceiverBase(addressesProvider) Ownable()
    {
        ORACLE = IPriceOracleGetter(addressesProvider.getPriceOracle());
        QUICKSWAP_ROUTER = quickswapRouter;

        transferOwnership(owner);
    }

    /**
     * @dev Get the price of the asset from the oracle denominated in eth
     * @param asset address
     * @return eth price for the asset
     */
    function _getPrice(address asset) internal view returns (uint256) {
        return ORACLE.getAssetPrice(asset);
    }

    /**
     * @dev Get the decimals of an asset
     * @return number of decimals of the asset
     */
    function _getDecimals(IERC20Metadata asset) internal view returns (uint8) {
        uint8 decimals = asset.decimals();
        // Ensure 10**decimals won't overflow a uint256
        require(decimals <= 77, "TOO_MANY_DECIMALS_ON_TOKEN");
        return decimals;
    }

    /**
     * @dev Get the reserve data associated to the asset
     * @return ReserveData struct containing the reserve data
     */
    function _getReserveData(address asset) internal view returns (DataTypes.ReserveData memory) {
        return POOL.getReserveData(asset);
    }

    /**
     * @dev Pull the ATokens from the user
     * @param reserveToken address of the asset being withdrawn
     * @param reserveAToken address of the aToken of the reserve
     * @param user address
     * @param amountOfATokenToBeWithdrawn of tokens to be transferred to the contract
     * @param permitSignature struct containing the permit signature
     */
    function _pullATokenAndWithdraw(
        address reserveToken,
        IERC20WithPermit reserveAToken,
        address user,
        uint256 amountOfATokenToBeWithdrawn,
        PermitSignature memory permitSignature
    ) internal {
        // If deadline is set to zero, assume there is no signature for permit
        if (permitSignature.deadline != 0) {
            reserveAToken.permit(
                user,
                address(this),
                permitSignature.amount,
                permitSignature.deadline,
                permitSignature.v,
                permitSignature.r,
                permitSignature.s
            );
        }

        // transfer from user to adapter
        reserveAToken.safeTransferFrom(user, address(this), amountOfATokenToBeWithdrawn);

        // withdraw reserve
        require(POOL.withdraw(reserveToken, amountOfATokenToBeWithdrawn, address(this)) == amountOfATokenToBeWithdrawn, "UNEXPECTED_AMOUNT_WITHDRAWN");
    }

    /**
     * @dev Emergency rescue for token stucked on this contract, as failsafe mechanism
     * - Funds should never remain in this contract more time than during transactions
     * - Only callable by the owner
     */
    function rescueTokens(IERC20Metadata token) external onlyOwner {
        token.safeTransfer(owner(), token.balanceOf(address(this)));
    }
}

// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.8.20;
// pragma experimental ABIEncoderV2;

// @OpenZeppelin imports
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

// @QuickSwap imports
import {ISwapRouter} from "@cryptoalgebra/integral-periphery/contracts/interfaces/ISwapRouter.sol";

// Other imports
import {BaseQuickSwapAdapter} from "./BaseQuickSwapAdapter.sol";
import {IPoolAddressesProvider} from "../interfaces/IPoolAddressesProvider.sol";

abstract contract BaseQuickSwapSellAdapter is BaseQuickSwapAdapter {

    using SafeERC20 for IERC20;

    constructor(IPoolAddressesProvider addressesProvider, ISwapRouter quickswapRouter, address owner)
        BaseQuickSwapAdapter(addressesProvider, quickswapRouter, owner)
    {}

    /**
     * @dev Swaps an exact `amountToSwap` of an asset to another
     * @param assetToSwapFrom Origin asset
     * @param assetToSwapTo Destination asset
     * @param amountToSwap Exact amount of `assetToSwapFrom` to be swapped
     * @param minAmountOut the min amount of `assetToSwapTo` to be received from the swap
     * @return the amount received from the swap
     */
    function _sellOnQuickSwap(
        address assetToSwapFrom,
        address assetToSwapTo,
        uint256 amountToSwap,
        uint256 minAmountOut
    ) internal returns (uint256) {

        // Approve the QuickSwap router to spend the asset
        IERC20(assetToSwapFrom).safeApprove(address(QUICKSWAP_ROUTER), 0);
        IERC20(assetToSwapFrom).safeApprove(address(QUICKSWAP_ROUTER), amountToSwap);

        // Swap logic here
        ISwapRouter.ExactInputSingleParams memory params = ISwapRouter.ExactInputSingleParams({
            tokenIn: assetToSwapFrom,
            tokenOut: assetToSwapTo,
            deployer: address(0),
            recipient: address(this),
            deadline: block.timestamp, // Needs to execute on the same block
            amountIn: amountToSwap,
            amountOutMinimum: minAmountOut, // We will calculate/get this value from staticcall on frontend
            limitSqrtPrice: 0 // No limit price
        });

        // Execute the swap on QuickSwap
        uint256 amount = QUICKSWAP_ROUTER.exactInputSingle(params);

        // Emit an event for the swap
        emit Swapped(assetToSwapFrom, assetToSwapTo, amountToSwap, amount);

        return amount;
    }
}